|Minimum Order Quantity||1 Piece|
|Internal Battery||24 VDC (nominal), 17.2 Amp-hour, 3 hrs.|
|Modem Data Rate||9,600 baud|
|Operating Tempraturer||40 Degree C|
Datascope’s CS100 Intra-Aortic Balloon Pump Machine with IntelliSync offers one-button start up and it automatically adapts to changing conditions.
The device automatically evaluates and selects optimal trigger source and lead, sets inflation at the dicrotic notch and deflates the balloon at the start of systole. It responds to changes in signal quality by selecting a new trigger source.
Datascope said the system offers consistent support for patients with PVCs and arrhythmias, has fast pneumatics, eliminates alarms due to ESU noise, and is easy to use to educed need for user intervention.
|Model Name/Number||BT 200|
|Number Of Transducer Sockets||1|
|Is It Portable||Portable|
|Probe Frequency||2 MHz|
|Auto Shut-Off Signal||1 Minute|
|Speaker Output Power||1.2 W Built in Loudspeaker|
This handy portable fetal doppler detects the fetal heart rate quickly from about 10-12 weeks through labor, and it's safe and simple to use. The new Hi Bebe BT200 hand held fetal heart rate monitor has been designed to be small and lightweight, yet robust, making it ideal for midwives, doctors and of course, pregnant women.
|Wave Length Mm||460 nm|
Phototherapy Equipment is the most common condition that requires medical attention and hospital readmission in newborns.  The yellow coloration of the skin and sclera in newborns with jaundice is the result of accumulation of unconjugated bilirubin. In most infants, unconjugated hyperbilirubinemia reflects a normal transitional phenomenon. However, in some infants, serum bilirubin levels may rise excessively, which can be cause for concern because unconjugated bilirubin is neurotoxic and can cause death in newborns and lifelong neurologic sequelae in infants who survive (kernicterus). For these reasons, the presence of neonatal jaundice frequently results in diagnostic evaluation.
|Parameter Measures||SpO2 + Pulse Rate|
|Display Type||Single Color LED|
|Display Mode||3 DISPLAY MODES|
|Continuous Working Time||10 hours|
|Pulse Rate Measurement Range||Upto 235 BPM|
|Pressure Range||20 cm HO|
|Breath Rate||40 Beat Per Minute|
|Number Of Channels||6 Channels|
|Number Of Channels||12 Channels|
|Accessories||User Manual And Warranty Card, Power Cord, Patient Cable|
|Syringe Size||all standard size|
|Usage/Application||Bulk Fluid Injection|
|Accuracy||Depend on Brand|
|Tube Length||1.5 m|
|Available Color||Blue transparent|
|Pressure Range (cm H2O)||100|
Supplemental oxygen therapy is one of the more commonly prescribed interventions used by physicians when caring for hypoxic patients acutely. This supplementation often takes the form of the low-flow nasal cannula (LFNC). However, there are limitations to this supplemental oxygen intervention. A traditional nasal cannula can only effectively provide only up to 4 to 6 liters per minute of supplemental oxygen. This equates to a FiO2 of approximately 0.37 to 0.45. Above this number, nasal mucosal irritation occurs with the drying of the passages, and there is, therefore, an increased potential for bleeding with prolonged use. In low-flow nasal cannula therapy, FiO2 delivery is directly tied to flow rate. For increased FiO2, the rate must be increased. The low-flow nasal cannula is an open system of supplementation with high levels of leaking air around the oxygen source. As such, the efficacy of treatment for the low-flow nasal cannula is limited. High-flow nasal cannula (HFNC) therapy is an oxygen supply system capable of delivering up to 100% humidified and heated oxygen at a flow rate of up to 60 liters per minute. All settings are controlled independently allowing for greater confidence in the delivery of supplemental oxygen as well as better outcomes when used. In addition to greater control over the delivery of FiO2, there are several benefits to using a high-flow nasal cannula. The physiological mechanism of action and uses for high-flow nasal cannula are explored here.
|Country of Origin||Made in India|
|Minimum Order Quantity||1 Piece|
|Model Name/Number||MEDIQUIP 301|
|Features||3 Gases Operated|
|Oxygen Flush||Oxygen Flush Operated|
|Rebreathing Volume||Minimum 20 ml Operated|
• Integrated breathing circuit with APL valve, excellent tightness.
• Replacing drive bellow is NOT required when operating adult/pediatric anesthesia.
• Applied with 1 high-precision vaporizers. (Selectatec).
• 10.1 inch screen with no dead space.
• Real-time detection for loops, Paw, BPM, VT and compliance.
• Comprehensive monitoring capabilities include ventilation parameters monitoring, preset parameters, alarm indication and breathing waveform monitoring.
• ACGO available to connect with T/Bain circuit for open operation(Optional).
• Yoke system with up to 3 back up cylinders (A type with 11 L size) (Optional).
|Model Name/Number||Diffrent model|
|Product Type||Medical Equipment|
|Type Of Equipment||Diposable|